From ok1teh at seznam.cz  Tue Sep  1 05:53:58 2015
From: ok1teh at seznam.cz (ok1teh Petrzilka)
Date: Tue, 01 Sep 2015 05:53:58 +0200 (CEST)
Subject: [Moon] ARRL EME contest - 13cm & up
References: <044201d0de97$40d4f2f0$c27ed8d0$@dxcc.com>
 <1905988985.6034959.1440445165565.JavaMail.yahoo@mail.yahoo.com>
 <Fse.rYFU.73cZxbCu{4f.1Lt0TR@seznam.cz>
 <J2u.rYD8.57wAOO5DmpS.1LtDno@seznam.cz>
Message-ID: <Cc{.rYx}.52FYtLxMEnX.1LvI5M@seznam.cz>

Just a reminder hi
http://www.darkside.cz/eme.php

73
Matej, OK1TEH


---------- P?vodn? zpr?va ----------
Od: ok1teh Petrzilka <ok1teh at seznam.cz>
Komu: moon at moonbounce.info
Datum: 25. 8. 2015 21:21:54
P?edm?t: ARRL EME contest - 13cm & up

"
Hi all,
just for an info, if you want to share info/qrl list about
expected activity in next EME contest, you can
always use for you announce ->
http://www.darkside.cz/eme.php

73
Matej, OK1TEH

"
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.moonbounce.info/pipermail/moon/attachments/20150901/b5ce972f/attachment.html>

From g3ltf at btinternet.com  Tue Sep  1 08:56:57 2015
From: g3ltf at btinternet.com (Peter Blair)
Date: Tue, 1 Sep 2015 07:56:57 +0100
Subject: [Moon] K2UYH operating plans for ARRL contest
Message-ID: <86ED3504728C4DE088BEBC6CE21AB048@PeterKBlairPC5>

Al has asked me to advise you of his operating plans. He will be operating as K2UYH this year.
?I am trying to get my station on during the MW EME Contest while I away at the European Microwave Conference.  So far only NE2U (George) has been able to operate.  George has operated with me many times in the past, but it is different when you are on your own. He will start the contest on 13 cm and will be set up to listen on both 2304 and 2320.  After things slow down he will probably switch to 6 cm and will stay there for the JA/VK window.  Adding the 2400 converter is too complicated without my knowlege of the system.  George will probably start on Sunday on 6 cm and then switch to 9 or 3 cm depending on how he is feeling.  The most complicated band to connect up  is 3 cm, so he may choose not to try this band. ?
73 Peter G3LTF 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.moonbounce.info/pipermail/moon/attachments/20150901/840be375/attachment.html>

From bruce at croskey.org  Tue Sep  1 19:20:15 2015
From: bruce at croskey.org (Bruce Croskey)
Date: Tue, 1 Sep 2015 10:20:15 -0700
Subject: [Moon] (no subject)
Message-ID: <4C0178378E304029953DD6E7B42ED2D4@ah0uorh6akjfkj>

Are there any EMEers in the San Francisco Bay area willing to mentor a
newbie on two meters??? 
Please contact me of line
AH0U at ARRL.Net
 
73,
Bruce , AH0U
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.moonbounce.info/pipermail/moon/attachments/20150901/ef0c6258/attachment.html>

From n4pz at live.com  Tue Sep  1 22:04:33 2015
From: n4pz at live.com (Steve Gross)
Date: Tue, 1 Sep 2015 15:04:33 -0500
Subject: [Moon] 1296.020 CW after my moonrise
Message-ID: <BLU436-SMTP1829CB5B5256F5C8C2870D3F36A0@phx.gbl>

Hello All

 

I will try to be on 1296.020 calling CQ when the moon is at GHA 30 degrees.

 

CW 1500 watts, 4.9 meter dish.

 

CW only.

 

73 Steve N4PZ

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.moonbounce.info/pipermail/moon/attachments/20150901/0a60a7d0/attachment.html>

From g3ltf at btinternet.com  Thu Sep  3 19:10:05 2015
From: g3ltf at btinternet.com (Peter Blair)
Date: Thu, 3 Sep 2015 18:10:05 +0100
Subject: [Moon] G3LTF contest operation plan
Message-ID: <507F620E2E7048CD84944B236AA111CC@PeterKBlairPC5>

I plan to start on 13cm, I will be transmitting on 2320 and listening as well on all the other segments. Please remember that G and some other countries cannot transmit on 2304 . I will change to 6cm  when it is daylight, I am minimising feed changes at nightime these days. I will probably start on 6cm on the second pass but will also hope to get on 9cm as well. I will announce my band change on the HB9Q logger but I do not intend to co-ordinate QSOs there.
6m dish, 250W 13cm, 90W 9cm, 40W 6cm
GL, 73 Peter G3LTF 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.moonbounce.info/pipermail/moon/attachments/20150903/0eab8dc2/attachment.html>

From ploetz at snafu.de  Thu Sep  3 19:47:51 2015
From: ploetz at snafu.de (Manfred Ploetz)
Date: Thu, 3 Sep 2015 19:47:51 +0200
Subject: [Moon] G3LTF contest operation plan
In-Reply-To: <507F620E2E7048CD84944B236AA111CC@PeterKBlairPC5>
References: <507F620E2E7048CD84944B236AA111CC@PeterKBlairPC5>
Message-ID: <9C72AAFB91134B07A6B123B6929DB81B@Ultrabook01>

Hello Peter and others,

I have installed 10 GHz in my 2.4m dish now and DO NOT change to 24 GHz this weekend. (October 24/25 is reservated therefore) I can hear 10450 MHz but transmit 10368 only.

For my 4.9m dish I plan to install for SUTURDAY 2320 MHz TX and can hear on all other segments. (250W@ 4.9m) I will change to 9cm at Saturday afternoon an will keep this for next day work (sunday)

So no 6cm planned for the weekend; on special request only. I am not active for contest points !!!!! ..... therefore you can find me in the HB9Q logger from time to time.

GL, vy 73 MANFRED, DL7YC

From: Peter Blair 
Sent: Thursday, September 3, 2015 7:10 PM
To: freetalk moonnet ; Moon-Net 
Subject: [Moon] G3LTF contest operation plan

I plan to start on 13cm, I will be transmitting on 2320 and listening as well on all the other segments. Please remember that G and some other countries cannot transmit on 2304 . I will change to 6cm  when it is daylight, I am minimising feed changes at nightime these days. I will probably start on 6cm on the second pass but will also hope to get on 9cm as well. I will announce my band change on the HB9Q logger but I do not intend to co-ordinate QSOs there.
6m dish, 250W 13cm, 90W 9cm, 40W 6cm
GL, 73 Peter G3LTF 


--------------------------------------------------------------------------------
_______________________________________________
Moon mailing list
Moon at moonbounce.info
http://lists.moonbounce.info/listinfo/moon
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.moonbounce.info/pipermail/moon/attachments/20150903/09048232/attachment.html>

From brian-coleman at tiscali.co.uk  Thu Sep  3 21:18:14 2015
From: brian-coleman at tiscali.co.uk (Brian Coleman)
Date: Thu, 3 Sep 2015 20:18:14 +0100
Subject: [Moon] Sep 5 / 6 Activity
Message-ID: <13A15DF41F134531B9EE980F88CF9929@BrianPC>

Hello Folks

I am thinking of 5.7GHz on Saturday 5th ( limited time ) and 10GHz on Sunday.

73 Brian G4NNS
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.moonbounce.info/pipermail/moon/attachments/20150903/a76d138c/attachment.html>

From g3ltf at btinternet.com  Thu Sep  3 23:44:47 2015
From: g3ltf at btinternet.com (Peter Blair)
Date: Thu, 3 Sep 2015 22:44:47 +0100
Subject: [Moon] G3LTF contest operation plan
In-Reply-To: <9C72AAFB91134B07A6B123B6929DB81B@Ultrabook01>
References: <507F620E2E7048CD84944B236AA111CC@PeterKBlairPC5>
 <9C72AAFB91134B07A6B123B6929DB81B@Ultrabook01>
Message-ID: <66384586511A4D7BB9412676808C8E37@PeterKBlairPC5>

Manfred....You say   ?I am not active for contest points !!!!! ..... therefore you can find me in the HB9Q logger from time to time.? You dont need to worry, use of the logger all the time is now permitted, look at the new ARRL rules.
73 Peter G3LTF 


From: Manfred Ploetz 
Sent: Thursday, September 03, 2015 6:47 PM
To: Peter Blair ; freetalk moonnet ; Moon-Net 
Subject: Re: [Moon] G3LTF contest operation plan

Hello Peter and others,

I have installed 10 GHz in my 2.4m dish now and DO NOT change to 24 GHz this weekend. (October 24/25 is reservated therefore) I can hear 10450 MHz but transmit 10368 only.

For my 4.9m dish I plan to install for SUTURDAY 2320 MHz TX and can hear on all other segments. (250W@ 4.9m) I will change to 9cm at Saturday afternoon an will keep this for next day work (sunday)

So no 6cm planned for the weekend; on special request only. I am not active for contest points !!!!! ..... therefore you can find me in the HB9Q logger from time to time.

GL, vy 73 MANFRED, DL7YC

From: Peter Blair 
Sent: Thursday, September 3, 2015 7:10 PM
To: freetalk moonnet ; Moon-Net 
Subject: [Moon] G3LTF contest operation plan

I plan to start on 13cm, I will be transmitting on 2320 and listening as well on all the other segments. Please remember that G and some other countries cannot transmit on 2304 . I will change to 6cm  when it is daylight, I am minimising feed changes at nightime these days. I will probably start on 6cm on the second pass but will also hope to get on 9cm as well. I will announce my band change on the HB9Q logger but I do not intend to co-ordinate QSOs there.
6m dish, 250W 13cm, 90W 9cm, 40W 6cm
GL, 73 Peter G3LTF 


--------------------------------------------------------------------------------
_______________________________________________
Moon mailing list
Moon at moonbounce.info
http://lists.moonbounce.info/listinfo/moon
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.moonbounce.info/pipermail/moon/attachments/20150903/78e47232/attachment.html>

From ja4blc at web-sanin.co.jp  Fri Sep  4 00:23:52 2015
From: ja4blc at web-sanin.co.jp (Yoshiro Mataka JA4BLC)
Date: Fri, 4 Sep 2015 07:23:52 +0900
Subject: [Moon] ARRL EME MW
In-Reply-To: <5579F4AB.2010904@web-sanin.co.jp>
References: <5579F4AB.2010904@web-sanin.co.jp>
Message-ID: <55E8C878.3010305@web-sanin.co.jp>

Hi All
JA4BLC will be QRV in the weekend
Saturday
0000-0200z 2400.050 and 10450.050 for Eu
1630-1730z 2400.100 for NA
1800-1900z 10450.100 for NA
Sunday
0000-0300z 2400.050 and 5760.050(*) for Eu
1730-1900z 2400.100 for NA
1900-2000z 5760.100(*) for NA

(*) when WX fine and I will be able to change the feed. Otherwise I will
stay on 10450 on Sunday.

Another activity in JA:
5760 and 10450 JA1WQF and JA6CZD

GL
de Yoshiro JA4BLC

From kl7uw at acsalaska.net  Fri Sep  4 01:16:56 2015
From: kl7uw at acsalaska.net (Edward R Cole)
Date: Thu, 03 Sep 2015 15:16:56 -0800
Subject: [Moon] [Moon-Net]  G3LTF contest operation plan
In-Reply-To: <66384586511A4D7BB9412676808C8E37@PeterKBlairPC5>
References: <507F620E2E7048CD84944B236AA111CC@PeterKBlairPC5>
 <9C72AAFB91134B07A6B123B6929DB81B@Ultrabook01>
 <66384586511A4D7BB9412676808C8E37@PeterKBlairPC5>
Message-ID: <201509032316.t83NGviR007921@mail40c28.carrierzone.com>

Not known if I can install my 3400 system in time 
(Rx-only), but I will sign-on HB9Q logger to find 
out who is QRV on 9cm (probably Sunday as rain 
today-tomorrow prevents working outside, so 
Saturday will be my only opportunity to install the feed - temporarily).

I'd like to be able to see how well my Rx with 
0.57 dBNF on 4.9m dish works (hoping for nice wx Saturday).

I will be QRV 144 & 1296 in October ARRL weekend.

73, Ed - KL7UW

At 01:44 PM 9/3/2015, Peter Blair wrote:
>Manfred....You say   ???I am not active for 
>contest points !!!!! ..... therefore you can 
>find me in the HB9Q logger from time to time.??? 
>You dont need to worry, use of the logger all 
>the time is now permitted, look at the new ARRL rules.
>73 Peter G3LTF
>
>
>From: <mailto:ploetz at snafu.de>Manfred Ploetz
>Sent: Thursday, September 03, 2015 6:47 PM
>To: <mailto:g3ltf at btinternet.com>Peter Blair ; 
><mailto:moon at moonbounce.info>freetalk moonnet ; 
><mailto:moon-net at mailman.pe1itr.com>Moon-Net
>Subject: Re: [Moon] G3LTF contest operation plan
>
>Hello Peter and others,
>
>I have installed 10 GHz in my 2.4m dish now and 
>DO NOT change to 24 GHz this weekend. (October 
>24/25 is reservated therefore) I can hear 10450 MHz but transmit 10368 only.
>
>For my 4.9m dish I plan to install for SUTURDAY 
>2320 MHz TX and can hear on all other segments. 
>(250W@ 4.9m) I will change to 9cm at Saturday 
>afternoon an will keep this for next day work (sunday)
>
>So no 6cm planned for the weekend; on special 
>request only. I am not active for contest points 
>!!!!! ..... therefore you can find me in the HB9Q logger from time to time.
>
>GL, vy 73 MANFRED, DL7YC
>
>From: <mailto:g3ltf at btinternet.com>Peter Blair
>Sent: Thursday, September 3, 2015 7:10 PM
>To: <mailto:moon at moonbounce.info>freetalk 
>moonnet ; <mailto:moon-net at mailman.pe1itr.com>Moon-Net
>Subject: [Moon] G3LTF contest operation plan
>
>I plan to start on 13cm, I will be transmitting 
>on 2320 and listening as well on all the other 
>segments. Please remember that G and some other 
>countries cannot transmit on 2304 . I will 
>change to 6cm  when it is daylight, I am 
>minimising feed changes at nightime these days. 
>I will probably start on 6cm on the second pass 
>but will also hope to get on 9cm as well. I will 
>announce my band change on the HB9Q logger but I 
>do not intend to co-ordinate QSOs there.
>6m dish, 250W 13cm, 90W 9cm, 40W 6cm
>GL, 73 Peter G3LTF
>
>
>----------
>_______________________________________________
>Moon mailing list
>Moon at moonbounce.info
>http://lists.moonbounce.info/listinfo/moon
>_______________________________________________
>Moon-Net posting and subscription instructions 
>are at http://www.nlsa.com/nets/moon-net-help.html

73, Ed - KL7UW
http://www.kl7uw.com
     "Kits made by KL7UW"
Dubus Mag business:
     dubususa at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.moonbounce.info/pipermail/moon/attachments/20150903/b5654335/attachment-0001.html>

From jewell at btinternet.com  Fri Sep  4 09:32:50 2015
From: jewell at btinternet.com (Sam Jewell)
Date: Fri, 4 Sep 2015 08:32:50 +0100
Subject: [Moon] [Moon-Net]  G3LTF contest operation plan
In-Reply-To: <201509032316.t83NGviR007921@mail40c28.carrierzone.com>
References: <507F620E2E7048CD84944B236AA111CC@PeterKBlairPC5>
 <9C72AAFB91134B07A6B123B6929DB81B@Ultrabook01>
 <66384586511A4D7BB9412676808C8E37@PeterKBlairPC5>
 <201509032316.t83NGviR007921@mail40c28.carrierzone.com>
Message-ID: <1EE2169A-DCA9-47A5-9874-4E58662155EF@btinternet.com>

Similarly I will be on 9cm, but receive only, to see what I can hear. I have been too busy recently (preamp and transverter development) ) to pay any attention to getting the 9cm transmit system sorted.
I did hear Peter, G3LTF, on SSB last 9cm AW.
And I thought being retired would give me more time to play radio...........

73 de Sam, G4DDK


Sent from my DDKpad

g4ddk.com
g4ddk.blogspot.com


> On 4 Sep 2015, at 00:16, Edward R Cole <kl7uw at acsalaska.net> wrote:
> 
> Not known if I can install my 3400 system in time (Rx-only), but I will sign-on HB9Q logger to find out who is QRV on 9cm (probably Sunday as rain today-tomorrow prevents working outside, so Saturday will be my only opportunity to install the feed - temporarily).
> 
> I'd like to be able to see how well my Rx with 0.57 dBNF on 4.9m dish works (hoping for nice wx Saturday).
> 
> I will be QRV 144 & 1296 in October ARRL weekend.
> 
> 73, Ed - KL7UW
> 
> At 01:44 PM 9/3/2015, Peter Blair wrote:
>> Manfred....You say   ?I am not active for contest points !!!!! ..... therefore you can find me in the HB9Q logger from time to time.? You dont need to worry, use of the logger all the time is now permitted, look at the new ARRL rules.
>> 73 Peter G3LTF 
>>  
>>  
>> From: Manfred Ploetz 
>> Sent: Thursday, September 03, 2015 6:47 PM
>> To: Peter Blair ; freetalk moonnet ; Moon-Net 
>> Subject: Re: [Moon] G3LTF contest operation plan
>>  
>> Hello Peter and others,
>>  
>> I have installed 10 GHz in my 2.4m dish now and DO NOT change to 24 GHz this weekend. (October 24/25 is reservated therefore) I can hear 10450 MHz but transmit 10368 only.
>>  
>> For my 4.9m dish I plan to install for SUTURDAY 2320 MHz TX and can hear on all other segments. (250W@ 4.9m) I will change to 9cm at Saturday afternoon an will keep this for next day work (sunday)
>>  
>> So no 6cm planned for the weekend; on special request only. I am not active for contest points !!!!! ..... therefore you can find me in the HB9Q logger from time to time.
>>  
>> GL, vy 73 MANFRED, DL7YC
>>  
>> From: Peter Blair 
>> Sent: Thursday, September 3, 2015 7:10 PM
>> To: freetalk moonnet ; Moon-Net 
>> Subject: [Moon] G3LTF contest operation plan
>>  
>> I plan to start on 13cm, I will be transmitting on 2320 and listening as well on all the other segments. Please remember that G and some other countries cannot transmit on 2304 . I will change to 6cm  when it is daylight, I am minimising feed changes at nightime these days. I will probably start on 6cm on the second pass but will also hope to get on 9cm as well. I will announce my band change on the HB9Q logger but I do not intend to co-ordinate QSOs there.
>> 6m dish, 250W 13cm, 90W 9cm, 40W 6cm
>> GL, 73 Peter G3LTF 
>> 
>> _______________________________________________
>> Moon mailing list
>> Moon at moonbounce.info
>> http://lists.moonbounce.info/listinfo/moon
>> _______________________________________________
>> Moon-Net posting and subscription instructions are at http://www.nlsa.com/nets/moon-net-help.html
> 73, Ed - KL7UW
> http://www.kl7uw.com 
>     "Kits made by KL7UW"
> Dubus Mag business:
>     dubususa at gmail.com 
> _______________________________________________
> Moon-Net posting and subscription instructions are at http://www.nlsa.com/nets/moon-net-help.html
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.moonbounce.info/pipermail/moon/attachments/20150904/e293d993/attachment.html>

From sp6jlw at wp.pl  Fri Sep  4 13:20:16 2015
From: sp6jlw at wp.pl (Andrzej Matuszny SP6JLW)
Date: Fri, 04 Sep 2015 13:20:16 +0200
Subject: [Moon] ARRL EME Microwave
Message-ID: <55e97e7005b950.80232770@wp.pl>


HELLO ALL
We do not  start this round of the competition.
Good luck in the contest.
Andy Jacek & Paul ( SP6JLW, SP6OPN, SQ6OPG)





From wd5ago at hotmail.com  Fri Sep  4 14:27:57 2015
From: wd5ago at hotmail.com (Tommy Henderson)
Date: Fri, 4 Sep 2015 07:27:57 -0500
Subject: [Moon] 13cm operation
Message-ID: <BLU176-W19A98C9633FCD1CBF6E48A80570@phx.gbl>


our group will be on 13cm on the 1st pass, (all frequencies: 2300, TX 2304, 2320, 2400).  We have missed a few in the past on X mode from EU in 2320.  Please look for us on 2304, we will do the same.

More than likely EME activity will be just a couple of hours on moon rise and set (night pass) as we have many activities committed to on Saturday.  Sunday is up in the air, but will try to fire up 6cm.  Will post on the logger when ready.  Again many activities already planned on Sunday so the same goes on the Moon Pass.
 
Been very busy with work here and the other hobbies (manly EV Drag Racing, I am looking for DC Series wound motors in the 10 to 20 HP range!) but We will give it another year of operation (32 years ARRL EME).
 
Next month we have the new large horn working FB, and will be on 23cm and 70cm on the last leg of contest.  Will be using some new designed LNAs for 70cm and 23cm which will be available soon.
 
 
73's  CU later tonight (around 0700 Z )
 
 

Tommy WD5AGO 
  		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.moonbounce.info/pipermail/moon/attachments/20150904/94297446/attachment.html>

From strihavka at upcmail.cz  Fri Sep  4 15:16:05 2015
From: strihavka at upcmail.cz (Frantisek Strihavka)
Date: Fri, 04 Sep 2015 13:16:05 +0000
Subject: [Moon] ARRLContest
Message-ID: <55E99995.4030004@upcmail.cz>

Hello,
I plan to be QRV at Saturday 5th on 13cm and 6cm - QSY time 1 min.
                               at Sunday 6th on 3cm
GL to all    Franta OK1CA

From dragan9a5aa at gmail.com  Fri Sep  4 19:22:42 2015
From: dragan9a5aa at gmail.com (Miodrag Dragan Viskovic)
Date: Fri, 4 Sep 2015 19:22:42 +0200
Subject: [Moon] ARRL contest
Message-ID: <CA+skhdaxzTvZ2KpuCJmfN56s6g1Aq68mi_CgZwyo_pqpyE3vNw@mail.gmail.com>

Hi EME friends,

I will not be on EME this weekend.
I wish you all good conditions and good fun.

73s, Dragan 9A5AA

From ok1dfc at seznam.cz  Fri Sep  4 22:12:51 2015
From: ok1dfc at seznam.cz (Zdenek SAMEK-OK1DFC)
Date: Fri, 04 Sep 2015 22:12:51 +0200 (CEST)
Subject: [Moon] ARRLContest
References: <55E99995.4030004@upcmail.cz>
Message-ID: <Aal.2kdg.65o1cCHuL88.1LwVj3@seznam.cz>

Unexpected problem during change the feed for 2320 MHz in 10m dish, spend 
more than 5 hours fight in dish till total dark. Will try fix last problem 
with powering cable early morning and catch some of you on 13cm. Murphy 
running like hell again :-) Sorry guys!

-- 
Zdenek - OK1DFC
www.ok1dfc.com
QRV 144 - 3400 MHz EME - QRO and 10m DISH
WAC 432 - 1296 - 2320 MHz
DXCC 432 - 1296 MHz


---------- P?vodn? zpr?va ----------
Od: Frantisek Strihavka <strihavka at upcmail.cz>
Komu: moon-net at mailman.pe1itr.com, moon at moonbounce.info
Datum: 4. 9. 2015 15:23:47
P?edm?t: [Moon] ARRLContest

"Hello,
I plan to be QRV at Saturday 5th on 13cm and 6cm - QSY time 1 min.
at Sunday 6th on 3cm
GL to all Franta OK1CA
_______________________________________________
Moon mailing list
Moon at moonbounce.info
http://lists.moonbounce.info/listinfo/moon"
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.moonbounce.info/pipermail/moon/attachments/20150904/dfd18ed6/attachment.html>

From dj3jj at gmx.net  Fri Sep  4 22:32:07 2015
From: dj3jj at gmx.net (AH)
Date: Fri, 4 Sep 2015 22:32:07 +0200
Subject: [Moon] RX performance webside online agn
Message-ID: <55E9FFC7.5080606@gmx.net>

http://www.do9bc.com/?page_id=632

After crash i did start to put on my list agn on my friends webside. Tnx 
Claus for support.

I started with 144, 432 and 1296 MHz

The rest will be redesigned soon.

Its possible to search for your callsing or to sort the list by clicking 
on the header e.g. station etc.

If you sent me update info, please sent me Solar flux index/units 
(SFI/SFU) plus date and time of measurement and SF units for the used band.
Pse try to do this with Dougs tool so that we have a correct reference.

gl to u all in contest

73s Andreas

From pa3dzl at ziggo.nl  Fri Sep  4 22:52:06 2015
From: pa3dzl at ziggo.nl (Jac de Bruijn)
Date: Fri, 4 Sep 2015 22:52:06 +0200
Subject: [Moon] PA3DZL not QRV during the contest
In-Reply-To: <55e97e7005b950.80232770@wp.pl>
References: <55e97e7005b950.80232770@wp.pl>
Message-ID: <C3D7C664-3115-4ABB-A9F6-B714AB446A96@ziggo.nl>

Hello EME friends,

I am not able to be QRV due to QRL and family commitments.

Good luck to everybody and enjoy the contest mni QSOs

Jac, PA3DZL

Email sent via iPhone

From pa3dzl at ziggo.nl  Fri Sep  4 22:57:02 2015
From: pa3dzl at ziggo.nl (Jac de Bruijn)
Date: Fri, 4 Sep 2015 22:57:02 +0200
Subject: [Moon] PA3DZL not QRV during the contest
References: <C3D7C664-3115-4ABB-A9F6-B714AB446A96@ziggo.nl>
Message-ID: <ED4F6143-3585-45EB-8833-48EB55661D8C@ziggo.nl>


> Hello EME friends,
> 
> I am not able to be QRV due to QRL and family commitments.
> 
> Good luck to everybody and enjoy the contest mni QSOs
> 
> Jac, PA3DZL
> 
> Email sent via iPhone

From ja4blc at web-sanin.co.jp  Fri Sep  4 23:28:57 2015
From: ja4blc at web-sanin.co.jp (Yoshiro Mataka JA4BLC)
Date: Sat, 5 Sep 2015 06:28:57 +0900
Subject: [Moon] ARRL EME MW revised
In-Reply-To: <55E8C878.3010305@web-sanin.co.jp>
References: <5579F4AB.2010904@web-sanin.co.jp>
 <55E8C878.3010305@web-sanin.co.jp>
Message-ID: <55EA0D19.3000502@web-sanin.co.jp>

Hi All
JA4BLC will be QRV in the weekend
Saturday
0000-0100z 2400.050 for Eu
0100-0200z 10450.050 for Eu
1630-1730z 2400.100 for NA
1800-1900z 10450.100 for NA
Sunday
0000-0100z 2400.050 for Eu
0100-0300z 5760.100(*)
1730-1900z 2400.100 for NA
1900-2000z 5760.100(*)

(*) when WX fine and I will be able to change the feed. Otherwise I will
stay on 10450 on Sunday.

Another activity in JA:
5760 and 10450 JA1WQF and JA6CZD
2400 JA8IAD

GL
de Yoshiro JA4BLC

From f6dro at wanadoo.fr  Sat Sep  5 13:59:40 2015
From: f6dro at wanadoo.fr (Dom DEHAYS)
Date: Sat, 5 Sep 2015 13:59:40 +0200
Subject: [Moon] anan and eme?
References: <201405161723.s4GHNPHQ045275@denali.acsalaska.net>
Message-ID: <4E15DC8BCFD84D03BEE39EFEF59EAF45@drom1h6p8vlbd2>

Hello ,

anyone here managed to get the anan work with the F1EHN software for 
automatic doppler correction pse (on 3cm for me)?

73
Dom/F6DRO 


From jh1krc at syd.odn.ne.jp  Sat Sep  5 14:38:33 2015
From: jh1krc at syd.odn.ne.jp (M. Watanabe)
Date: Sat, 5 Sep 2015 21:38:33 +0900
Subject: [Moon] ARRL 6cm
Message-ID: <20150905123833939.ECVK.63044.amsa502.odn.ne.jp@msa502.odn.ne.jp>

Hello Franta, Yoshiro, and someone who is willing to take part in the ARRL contest on 6cm, 

Today I have some time to progress in 6cm system. 
I think it would take a few more hours to connect WG 
output to antenna feed via a coax of good quality.  
( I wonder if I have some....)

At least, if the weather conditions allow, I like to listen to 
NA window and EU window on 6cm, Saturday and Sunday. 

If fortunate enough I will transmit 250W at TX WG output 
into 4.4m TVRO.  ANT and RX performances are unknown. 

GL!!


Mike JH1KRC 


From rick1ds at hotmail.com  Mon Sep  7 23:40:57 2015
From: rick1ds at hotmail.com (Rick R)
Date: Mon, 7 Sep 2015 17:40:57 -0400
Subject: [Moon] Need your input please
Message-ID: <BAY169-W4CA70095045202901E987FA540@phx.gbl>

As the first weekend of the ARRL EME contest is over, I want to solicit your feedback on two issues for potential publication in QST with the contest results which will appear next year. I will be writing up the commentary on the contest as I have for the past few years.First--did you have any unusual QSOs, interesting happenings, or Murphy (problem) issues?Secondly--did you use the EME loggers, internet or other means of setting up QSOs for the various microwave bands and how effective do you think this was? Did it change the number of contacts? Did it enhance your satisfaction with being on the air? How do you think it impacts this contest overall?Please contact me directly with your thoughts and I will try to massage them into the reporting of the contest once all the weekends are done and the logs are completed and results are ready from ARRL.  Thank you all.  73, Rick, K1DS      rick1ds at hotmail.com 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.moonbounce.info/pipermail/moon/attachments/20150907/c4143664/attachment.html>

From jh1krc at syd.odn.ne.jp  Tue Sep  8 05:59:23 2015
From: jh1krc at syd.odn.ne.jp (M. Watanabe)
Date: Tue, 8 Sep 2015 12:59:23 +0900
Subject: [Moon] 6cm with a little progress
Message-ID: <20150908035923494.HIFT.63044.amsa502.odn.ne.jp@msa502.odn.ne.jp>

Hi all, 

I like to report on my progress in my 6cm system during 
ARRL conest.

Originaly, WR-137 hard/flexible waveguides were used for 
my 4.4m TVRO.  
The reason why I chose was that WG system is ideal for a 
high power operation.
But this system was inconvenient, and hard to maintain. 

Instead of the former flexible WG lines and WG feed, tried to 
connect a WD5AGO round septum feed ( which I bought at 
2010 EME Conference) with LNA's via a coax harness, for my 6cm operation last week-end. 

A NOS LDF4-50A coax is used both for RX port to the shack, 
and TX port to WG transducer at the foot of dish pedestal.  
I began the work from Saturday afternoon.  

At the last moment of the construction work over the night, 
I found the male plug for the WG-end was an SC, not N. 
SRI but I had no other male plug for the Heliax cable now. 

So what I did was to receive in the Sunday EU window, 
but could not hear a single echo. I don't know why.

Receiving frequency is accurate in precision measurement. 
The beam is in the correct direction with more or less 
1 degree width at -3dB.  Sun noise was only 8dB or so 
in the badly cloudy weather on Sunday. 

I guess the feed may not be in the proper focal position. 

The WG transducer handles 500 watts+ (at least for a short 
period test in the shack). The size (40x20 mm) is different 
from WR-137 but found no SWR problem. 
I hope my WD5AGO feed handles such a QRO....

Unfortunately heavy rain began in the Sunday afternoon, 
so my progress stopped then. I did not go to the shack 
in the NA window (from 1 a.m. local).  


BTW, I plan to participate in MUD 2015 in San Diego. 
Hope to see K6JEY, KL6M, etc. who attend the meeting!!


Mike JH1KRC 









From pkb100 at btinternet.com  Tue Sep  8 10:27:28 2015
From: pkb100 at btinternet.com (Peter Blair)
Date: Tue, 8 Sep 2015 09:27:28 +0100
Subject: [Moon] G3LTF results ARRL microwave
Message-ID: <3CF0992A101C42DA8FA95B6409B24BEA@PeterKBlairPC5>

On 13cm I worked, UA3PTW, OK1CA, JA4BLC*, JA8IAD*, OH2DG, SP7DCS, SM3AKW, UA4HTS, F4JWF, OK1DFC, DL7YC, HB9Q, SV3AAF, WA9FWD*, HB9SV, SP3XBO, WD5AGO*, W5LUA*, WA6PY*, OH1LRY, OZ4MM, K5GW*, G4BAO, W6YX*, PY2BS, SM2CEW, OZ5G, WA8RJF*, KL6M*.    (* = Crossband QSO )  CWNR K2UYH*, Heard ON5RR*, SM3BYA*, DF3RU and DJ3FI, lost, sri..    Total 29  ( 2013 =34, 2014 =23)

On 9cm I worked OH2DG, ES5PC Total 2 ( 2013=9, 2014=9 )

On 6cm I worked HB9Q, SM6FHZ, UA3PTW, IK2RTI, OH2DG, SV3AAF, SM6PGP. Total 7 ( 2013=7, 2014=11)

All QSOs were fully random CW, Logger was used only to announce band operation. My operating hours were pretty much as previous years. 
Activity on 6 and 9 was dissapointing compared to previous years and several regulars were missing from13cm. I guess lots are migrating to 3cm JT4G, and we also had a big 144MHz contest in Europe at the same time. However, IMHO, having a contest on 5 microwave bands simultaneously is not a very clever arrangement.
Thanks to all for the nice  QSOs.
73 Peter G3LTF 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.moonbounce.info/pipermail/moon/attachments/20150908/fd6eef96/attachment.html>

From kl7uw at acsalaska.net  Tue Sep  8 11:12:57 2015
From: kl7uw at acsalaska.net (Edward R Cole)
Date: Tue, 08 Sep 2015 01:12:57 -0800
Subject: [Moon] G3LTF results ARRL microwave
In-Reply-To: <3CF0992A101C42DA8FA95B6409B24BEA@PeterKBlairPC5>
References: <3CF0992A101C42DA8FA95B6409B24BEA@PeterKBlairPC5>
Message-ID: <201509080912.t889CvIT003175@mail40c28.carrierzone.com>

Peter,

I can imagine the problem deciding what band and at which 
time/day.  I will only have one mw-eme band for the ARRL Contest so 
makes it easy for me (9cm).  But I would be disappointed if not many 
chose to activate my chosen band.

I made some progress this weekend (though did not succeed in getting 
Rx installed on the dish).  I decided I should install the first Rx 
stage in my DEMI 3400-145 transverter and, after modifying an old 
DEMI microLO by installing a 188.900 MHz xtal, I was able to test the 
Rx with the +3 dBm output of the microLO thru attenuators.  I found 
leakage by connecting any attenuator produced S3 signal (microLO not 
connected to the transverter).  Using 63-dB atten on the 1/3rd 
harmonic of 1133.394 I had an S5 signal.  No signal produced S2 
noise.  I also assembled a pcb for a 10-MHz OCXO and distribution amp 
which will go out at the dish.

So best guess its working since I have no way to measure levels of 
the 3400 signal with the 1133 signal present.  I will be adding a LNA 
with 34-dB gain on the dish so probably more than enough gain.  It 
tested twice at 0.57 dBNF at conferences.

Wx is turning to typical fall time with lots of rain so finding a 
good day to work on the dish is harder.  I can probably install the 
feed in a light rain.  Still have the conversion work on the Toshiba 
amp to do, then all can be installed in the outside enclosure mounted 
on back of dish.

I am ready for the 50-1296 ARRL weekends with 144 & 1296 QRV (and 
just maybe have 1kW running for 50-MHz).

73, Ed - KL7UW
I'm also busy building DEMI kits for others (four in the last 
month).  Just finishing a 2304-144 transverter for K5GW.

At 12:27 AM 9/8/2015, Peter Blair wrote:
>On 13cm I worked, UA3PTW, OK1CA, JA4BLC*, JA8IAD*, OH2DG, SP7DCS, 
>SM3AKW, UA4HTS, F4JWF, OK1DFC, DL7YC, HB9Q, SV3AAF, WA9FWD*, HB9SV, 
>SP3XBO, WD5AGO*, W5LUA*, WA6PY*, OH1LRY, OZ4MM, K5GW*, G4BAO, W6YX*, 
>PY2BS, SM2CEW, OZ5G, WA8RJF*, KL6M*.    (* = Crossband QSO )  CWNR 
>K2UYH*, Heard ON5RR*, SM3BYA*, DF3RU and DJ3FI, lost, sri..    Total 
>29  ( 2013 =34, 2014 =23)
>
>On 9cm I worked OH2DG, ES5PC Total 2 ( 2013=9, 2014=9 )
>
>On 6cm I worked HB9Q, SM6FHZ, UA3PTW, IK2RTI, OH2DG, SV3AAF, SM6PGP. 
>Total 7 ( 2013=7, 2014=11)
>
>All QSOs were fully random CW, Logger was used only to announce band 
>operation. My operating hours were pretty much as previous years.
>Activity on 6 and 9 was dissapointing compared to previous years and 
>several regulars were missing from13cm. I guess lots are migrating 
>to 3cm JT4G, and we also had a big 144MHz contest in Europe at the 
>same time. However, IMHO, having a contest on 5 microwave bands 
>simultaneously is not a very clever arrangement.
>Thanks to all for the nice  QSOs.
>73 Peter G3LTF
>_______________________________________________
>Moon mailing list
>Moon at moonbounce.info
>http://lists.moonbounce.info/listinfo/moon

73, Ed - KL7UW
http://www.kl7uw.com
     "Kits made by KL7UW"
Dubus Mag business:
     dubususa at gmail.com


From per at per-dudek.de  Wed Sep  9 11:34:03 2015
From: per at per-dudek.de (Per Dudek)
Date: Wed, 09 Sep 2015 10:34:03 +0100
Subject: [Moon] 10ghz beacob
Message-ID: <55EFFD0B.4050002@per-dudek.de>

hi
sorry ,but 10ghz beacon is damaged.no output.
vy 73 per dk7lj

From ingolf.fhz at gmail.com  Wed Sep  9 13:05:35 2015
From: ingolf.fhz at gmail.com (Ingolf, SM6FHZ)
Date: Wed, 9 Sep 2015 13:05:35 +0200
Subject: [Moon] 10ghz beacob
In-Reply-To: <55EFFD0B.4050002@per-dudek.de>
References: <55EFFD0B.4050002@per-dudek.de>
Message-ID: <CAM0g6Nc9YGv1HOaL7rUkc_1e5+n7PZH2eyKm_D3LrFR4r=9U2Q@mail.gmail.com>

Thanks for the info Per.

Do you have any hint on when it can be expected to be on again?

It has proved to be a very useful tool for checking and aligning 10 GHz EME
equipment.

I believe the whole 10 GHz EME fraternity is very thankful for this
fantastic service. Well done Per.

73 / Ingolf, SM6FHZ


2015-09-09 11:34 GMT+02:00 Per Dudek <per at per-dudek.de>:

> hi
> sorry ,but 10ghz beacon is damaged.no output.
> vy 73 per dk7lj
> _______________________________________________
> Moon mailing list
> Moon at moonbounce.info
> http://lists.moonbounce.info/listinfo/moon
>



-- 
Ingolf, SM6FHZ
http://www.2ingandlin.se/SM6FHZ.htm
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.moonbounce.info/pipermail/moon/attachments/20150909/9d4e27f9/attachment.html>

From brian-coleman at tiscali.co.uk  Wed Sep  9 15:42:51 2015
From: brian-coleman at tiscali.co.uk (Brian Coleman)
Date: Wed, 9 Sep 2015 14:42:51 +0100
Subject: [Moon] 10ghz beacob
In-Reply-To: <55EFFD0B.4050002@per-dudek.de>
References: <55EFFD0B.4050002@per-dudek.de>
Message-ID: <A85ED9237CFF42E58D2BCB71A869D04A@BrianPC>

Hello Per

Many thanks for the beacon Per and good luck with the repair. I used the beacon yesterday morning to demonstrate EME / radio astronomy to a young person who will be doing a piece for the local radio station. It was more interesting than listening to my echoes !

73 Brian G4NNS



From: Per Dudek 
Sent: Wednesday, September 09, 2015 10:34 AM
To: moon-net at mailman.pe1itr.com ; moon at moonbounce.info 
Subject: [Moon] 10ghz beacob

hi
sorry ,but 10ghz beacon is damaged.no output.
vy 73 per dk7lj
_______________________________________________
Moon mailing list
Moon at moonbounce.info
http://lists.moonbounce.info/listinfo/moon
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.moonbounce.info/pipermail/moon/attachments/20150909/802c54ac/attachment.html>

From rick1ds at hotmail.com  Thu Sep 10 17:05:37 2015
From: rick1ds at hotmail.com (Rick R)
Date: Thu, 10 Sep 2015 11:05:37 -0400
Subject: [Moon] Your feedback & comments on ARRL uW weekend please
Message-ID: <BAY169-W138D8CDB0506CF12573EE60FA510@phx.gbl>

I am seeking your experiences, thoughts and feedback on the first microwave weekend of the ARRL EME contest in order to gather information for writing up the contest commentary in QST to be published next year. Even though there are two more contest weekends ahead, please send me any items of interest, unique contacts and comments about use of the internet, loggers, or other means of setting up and announcing for contacts. I have received comments from a few of you so far. Thanks for those. If others wish to contribute, I am hoping you'll drop me an email off the reflector. TNX es 73, Rick, K1DS 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.moonbounce.info/pipermail/moon/attachments/20150910/4c9f1ce1/attachment.html>

From pkb100 at btinternet.com  Thu Sep 10 19:24:14 2015
From: pkb100 at btinternet.com (Peter Blair)
Date: Thu, 10 Sep 2015 18:24:14 +0100
Subject: [Moon] G3LTF QRV 23cm CW
Message-ID: <ED7BCBEAC410483FAF04A97ED1A26600@PeterKBlairPC5>

If anyone wants a CW QSO or a test on 23cm I will be QRV from about 0730 tomorrow on the HB9Q logger probably hanging around 1296.030. 6m dish+400W.  I have a new feed, SM6FHZ design, which is giving me nearly a dB improvement in G/T but all I have heard so far are my own echoes, ( 56 in ssb) Sun noise is 20.6dB with SF82 and moon noise on 09/09/15 was 0.56dB, (near apogee)
73 Peter G3LTF 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.moonbounce.info/pipermail/moon/attachments/20150910/e7c97962/attachment.html>

From kim at oz5iq.dk  Fri Sep 11 15:51:41 2015
From: kim at oz5iq.dk (Kim Liljekrans)
Date: Fri, 11 Sep 2015 13:51:41 GMT
Subject: [Moon] (no subject)
Message-ID: <1441979501095.71700.29414@webmail4>

vowapoga
<http://lists.moonbounce.info/options/moon/kim%40oz5iq.dk>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.moonbounce.info/pipermail/moon/attachments/20150911/d7c8c47e/attachment.html>

From per at per-dudek.de  Tue Sep 15 18:26:38 2015
From: per at per-dudek.de (Per Dudek)
Date: Tue, 15 Sep 2015 17:26:38 +0100
Subject: [Moon] 10ghz beacon
Message-ID: <55F846BE.2000701@per-dudek.de>

hi
the beacon is ok again and working since 17:00 utc
vy 73 per dk7lj

From Outposter30 at shaw.ca  Fri Sep 18 20:19:49 2015
From: Outposter30 at shaw.ca (Jordan Arndt)
Date: Fri, 18 Sep 2015 12:19:49 -0600
Subject: [Moon] Test
References: <55C4EEFE.4070906@df6na.de>
Message-ID: <F7E2E2CD779348B49DF57DEBB7BBA643@Jordan1>


Test

From Outposter30 at shaw.ca  Fri Sep 18 21:29:54 2015
From: Outposter30 at shaw.ca (Jordan Arndt)
Date: Fri, 18 Sep 2015 13:29:54 -0600
Subject: [Moon] EME update and question
References: <55C4EEFE.4070906@df6na.de>
 <F7E2E2CD779348B49DF57DEBB7BBA643@Jordan1>
Message-ID: <3B4ED9D5884049478420E425ED0BDAB5@Jordan1>

Sorry for previous test, but I wasn't sure if my address book wasn't out of 
date.

I am replacing the wood/PVC crossboom on my very small EME station with a 
metal crossboom.

While I will still use round wooden support posts to mount the yagis to the 
crossboom, how far above or below the crossboom should the K1FO-25 yagis be 
mounted to provide good decoupling from the steel crossboom...?

Looking forward to your learned responses.....73...Jordan VE6ZT 


From sa6bun at gmail.com  Sun Sep 20 19:53:50 2015
From: sa6bun at gmail.com (Michael Kohla)
Date: Sun, 20 Sep 2015 19:53:50 +0200
Subject: [Moon] Phase Noise Utility
Message-ID: <CAGL03igsbN22OdZjVXKtGHYAJrR1UXQpp0GA_5Bsru9mwyC7pg@mail.gmail.com>

Hi all,

I am looking for the HP 85671A Phase Noise Utility (or a clone of it...).
It is a set of 2 memory cards, which fit into the mass memory module of the
HP8560 series of spectrum analyzers. Anyone out there, who wishes to part
with it?

73, Michael
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.moonbounce.info/pipermail/moon/attachments/20150920/84bc1bca/attachment.html>

From john at pa5ms.nl  Mon Sep 21 09:05:15 2015
From: john at pa5ms.nl (John PA5MS)
Date: Mon, 21 Sep 2015 09:05:15 +0200
Subject: [Moon] Found on the net : "Build your own noisefigure meter !"
Message-ID: <000c01d0f43b$e020d400$a0627c00$@pa5ms.nl>

Hi all,

 

Just came across an interesting project, Haven't heard much of it. Just
wondering if somebody already build something like this ? 

 

It's a noise figure indicator using an RTL-Dongle with the E4000 Chip in it.
Others seems not to work with this project. 

 

http://www.rtl-sdr.com/making-cheap-noise-figure-indicator-rtl-sdr/  

 

-----------------------------------------------------------------------

Quote from the website : 

 

JULY 16, 2014


MAKING A CHEAP NOISE FIGURE INDICATOR WITH AN RTL-SDR


Amateur radio hobbyists Frank Schmaling (DL2ALF), Wolf-Henning Rech (DF9IC)
and Alexander Kurpiers (DL8AAU) have
<http://www.df9ic.de/doc/2014/mmrt_2014/mmrt14_CANFI.pdf> uploaded a pdf
document containing slides which show how they made a cheap noise figure
indicator using an E4000 RTL-SDR dongle. A noise figure indicator can be
used to check the noise figure of various components used in RF
applications. The hardware of the device consists of an RTL-SDR, a MGZ 30889
preamp, a noise source, a 28V boost converter to power the noise source and
a serial to USB converter to control the noise source. They also created
their own custom software in C# to go along with the hardware. Their results
showed that this setup was comparable to a professional noise figure test
set.

-----------------------------------------------------------------------

 

Anyone any experience with this project ?  As far as I can see it looks
promising and for the homebuilders not too difficult to build. The dongle
seems harder to get but still available. I have 2 of them laying around so a
good start ;-) 

 

I saw DF9IC made some PCB for a MGA30889 pre-amp, a LM2733 Boost converter /
BST432 switch, and a cheap noise source with a BZV-55 zener diode not all
schematics are available in the PDF, but I haven't asked, or searched any
further yet..

 

For the very rare occasions I would like to measure a pre-amp this can be a
nice project, rather than buying fancy and expensive equipment which will be
unused on the shelve for 99,99% of the time. 

 

73!  John  PA5MS

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.moonbounce.info/pipermail/moon/attachments/20150921/98565a17/attachment.html>

From i5wbe at i5wbe.it  Tue Sep 22 20:01:39 2015
From: i5wbe at i5wbe.it (Enrico Baldacci)
Date: Tue, 22 Sep 2015 20:01:39 +0200
Subject: [Moon] Reminder ARI EME Trophy
Message-ID: <56019783.8000903@i5wbe.it>

Hello Guys,

this is a reminder for the ARI EME Trophy 2015  Autumn Section

Period:from 00.00 UTC of 26th September to 24.00 UTC of 27th September 2015

Bands: 144 - 432 MHz. 1.2 - 2.3 - 5.7 - 10 GHz.

You can find rules at this link:
http://www.eme2008.org/ari-eme/Trophy%202015.pdf

It's appreciated the use of  the log  that can be downloaded  from:
http://www.eme2008.org/ari-eme/Trophy%20log.xls

All Stations that have participated in both sections will participate to 
the final Trophy 2015 with the sum of the score obtained, the First 
station in each category wil receive a Prize an Award to all participants.

  Vy 73' de Enrico i5wbe



ARI EME Activity at: http://www.eme2008.org/ari-eme/contest.html






-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.moonbounce.info/pipermail/moon/attachments/20150922/0c2725f7/attachment.html>

From jvm at netvisit.nl  Sat Sep 26 00:04:25 2015
From: jvm at netvisit.nl (Jan van Muijlwijk)
Date: Sat, 26 Sep 2015 00:04:25 +0200
Subject: [Moon] PI9CAM activity
Message-ID: <2E0FE75B43EB4B56AAAF96652A17E941@muijlwijkPC>

On Saturday September 26  PI9CAM will be active again!
Starting approx. 20.00 UTC for the ARI contest.

End depending on activity...


25 m Dwingeloo dish

JO32ET

See www.camras.nl

23 cm: 120 W @ feed
70 cm: 400 W @ feed



CU off the moon!

73 from the PI9CAM team
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.moonbounce.info/pipermail/moon/attachments/20150926/82bf9991/attachment.html>

From ejespers at telenet.be  Sat Sep 26 09:00:08 2015
From: ejespers at telenet.be (Eddy Jespers)
Date: Sat, 26 Sep 2015 09:00:08 +0200
Subject: [Moon] ON0EME not tracking the moon
In-Reply-To: <2E0FE75B43EB4B56AAAF96652A17E941@muijlwijkPC>
References: <2E0FE75B43EB4B56AAAF96652A17E941@muijlwijkPC>
Message-ID: <C00695BD-B7A4-408A-8B82-115D1837C0C0@telenet.be>

I got a report from Luis, EA5DOM and Jos? EA3HMJ that the antenna and moon position in the monitoring and control gave a different position.

I checked and tried to move the antenna remotely, but the position stays at the last moon set position. 
It seems that the power supply for the AZ and EL motors failed.

I am in my EA5 location at the moment and will return back to Belgium next Tuesday, sept 29.   The ON0EME 1296 beacon will be repaired next week.

Vy 73?s Eddy ON7UN



From sp6jlw at wp.pl  Sat Sep 26 09:24:06 2015
From: sp6jlw at wp.pl (Andrzej Matuszny SP6JLW)
Date: Sat, 26 Sep 2015 09:24:06 +0200
Subject: [Moon] ARI
Message-ID: <5606481678ea26.82809480@wp.pl>


Hello
The activity plan our group ARI contest:
SP6OPN 13cm
SP6JLW 3cm
  SQ6OPG 6cm (It is not sure)
Good luck in the contest
Andy SP6JLW





From john at pa5ms.nl  Sat Sep 26 14:10:00 2015
From: john at pa5ms.nl (John PA5MS)
Date: Sat, 26 Sep 2015 14:10:00 +0200
Subject: [Moon] QRV Tonight on 144MHz in ARI EME Trophy
Message-ID: <002901d0f854$46150b70$d23f2250$@pa5ms.nl>

Hi all,

 

I will be QRV this evening and maybe a little while tonight depending on USA
activity. Calling CQ somewhere on 144MHz you will see me ;-) 

 

I can see + and - 1KHz from my center freq. I'm GPS locked and I'll TX on
144.xxx.000 don't compensate my dopler on TX  Hope I can find a free spot
somewhere on the band. 

 

Will monitor Live CQ and N0UK no QSO info will be given.  When more callers,
no 73 will be send but calling the next station means I got your 73

 

73! John PA5MS  JO21rq 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.moonbounce.info/pipermail/moon/attachments/20150926/854637d1/attachment.html>

From per at per-dudek.de  Sun Sep 27 10:23:37 2015
From: per at per-dudek.de (Per Dudek)
Date: Sun, 27 Sep 2015 08:23:37 +0000
Subject: [Moon] 10ghz beacon
Message-ID: <5607A789.4080608@per-dudek.de>

hi
during the night from saturday to monday the 10ghz beacon will not work 
because of measurements when the moon gets dark.
vy 73 per dk7lj

From g3ltf at btinternet.com  Mon Sep 28 23:46:17 2015
From: g3ltf at btinternet.com (Peter Blair)
Date: Mon, 28 Sep 2015 22:46:17 +0100
Subject: [Moon] G3LTF weekend activity
Message-ID: <8A157A30518543B28A593D70D0F29B86@PeterKBlairPC5>

Good activity over the weekend with real apogee conditions, signals and echoes were noticeably stronger.  ( we also had fantastic viewing conditions for the ?blood moon? eclipse) On 27th on 23cm CW I worked DG5CST, SP6ITF, PI9CAM, then on SSB DL6SH, OK1CS and G4CCH. then on CW SP3XBO, I1NDP, I5YDI, IZ1BPN, EA8DPM #, SM3AKW, PA3CQE, LZ1DX, SP2HMR #, ON5GS, G4BAO # ( 1.9m dish)  and then on 28th RA3EC and YL2GD.
Thanks to all for the nice QSOs. I am open for skeds / tests for most of this week on 70-6cm CW/SSB.
GL 73 Peter G3LTF 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.moonbounce.info/pipermail/moon/attachments/20150928/049a3ee5/attachment.html>