[Moon] Many More items for Sale (mostly VHF / UHF) - Update

Bob Kocisko k6pf at sbcglobal.net
Wed Jul 20 05:47:13 CEST 2016


Tnx to so many of you, I've sold a lot of the items recently posted.  A few are still  for sale & some new ones added as I continue to clean out my shack so here's an updated list:

1.  2m 8877 HPA.  W6PO design built by VE3KH.  Beautiful construction. Hv made many CW EME QSOs w/ this.  Easily puts out legal limit w/ 7-10 watts drive using the TE Systems 1410G driver listed below.  Just need a HVPS.  Mounted on a 12.25" H rack panel.  Asking $1,075.  See the following 2 items that were used w/ this PA. This is a great 2m hi pwr amp in vy gud condx.  Lots of copies of design included.

2.  TE Systems 1410-G for 2m.  Xlnt condx.  10 W Pin / 100 W Pout.  Will drive above 8877 HPA to legal limit pwr output.  With built-in preamp.  Includes manual & schematic.  Asking $225.

3.  Spare 8877.  Medical pull tested new.  Includes test documentation.  Reduced to $375.  Note used 8877s hv SOLD on eBay between $350 - $550 for an avg price of $437.

Note:  If  items 1 thru 3 above are all purchased together, will work a discounted pkg price.  Don't want to split up pkg.

4.  Yaesu FC-20 automatic antenna tuner.  It covers 160 thru 6m & expands the SWR matching range.  Purchased as part of an estate.  Don't hv antennas up yet so never used it.  The FC-20 includes the interconnecting control cable & a coax jumper between it & a Yaesu FT-847 or FT-100/D.  It also has three N(f) connectors.  Condition of cabinet is abt an 8 out of 10 & installation instructions are included.  Three sold on eBay for $152.50, $185 & $195.  Asking $125.

6.  Ailtech (Eaton) Model 7514 Precision Automatic Noise Figure Indicator (PANFI).  Includes pwr cable & Operation & Maintenance Manual.  No cable or noise source included.  Cabinet is a 9 out of 10 & front panel is a 10 out of 10.  Powers up & with HP signal generator at 30MHz (-75dBm) into the IF, meter deflects ok.  Weight is 21 lbs before packing to ship.  Very nice unit in xlnt condx.  Asking $125.

7.  Ailtech 75 Precision Noise Figure indicator (PANFI).  Includes pwr cable & copy of Operations & Maintenance Manual.  No cable or noise source included.  Top & bottom of cabinet are perforated & in gud condx.  Front panel is abt a 9 out of 10. Powers up & with HP signal generator at 30MHz (-70dBm) into the IF, meter deflects ok.  Weight is 38 lbs before packing to ship.  Rack mountable.  Asking $60.  

8.  Microwave Semiconductor Corp MSC Model 645 noise source which has a BNC (f) connector on one end & a SMA(f) on the other end.  No ENR or freq. markings on it & can't find any info Googling it.  Asking $50 & will sell with either the 7514 or 75 noise figure meter above.

9.  GR 1296 meter (30MHz) used mostly to calculate sun &/or moon noise.  Newer design.  Has pwr cable & short cable w/ GR connector for input.  Front panel & meter a 9 out of 10.  Case is a 7 out of 10.  Requires trouble shooting.  Lacks sensitivity.  Asking $50.

10.  GR 1296 meter (30MHz) used mostly to calculate sun &/or moon noise.  Older design.  Has BNC(f) connector on side for input.  Front panel & meter a 8 out of 10.  Case is a 7 out of 10.  Requires trouble shooting.  Sensitivity appears ok & seems to be working fine now.  Thought I saw some smoke out of when powered up some time ago.  May be due to bad electrolytic.  Asking $50.  Buy both & use one for parts.

11.  Linksys Wireless Ethernet Bridge (2.4 GHz, 802.11b).  Includes pwr supply.  Model WET 11.  Includes built-in antenna & single jack.   Purchased at a hamfest & never used.  Decided to go to 5GHz.  Looks like new condx.  Asking $10.

12.  Datum Programmable Time System / Time Code Generator. Model 9700AT. Never used it. Powers up & completes self-check. Includes manual. Rack mounted 1.75" H x 19" W x 19" D. The 9700AT performs two basic functions.  It operates as a Time Code Generator (divided down to 1 pps which is further divided) using an internal 1 or 5 MHz oscillator, or optionally it operates as a Translator using a Serial Time Code as a time base (such as an external frequency input like GPS).    This code is typically a member of the IRIG family.  I planned on using it as a time readout (IRIG) for my Odetics GPS rcvr but then I found a different one.  Reduced to $75. - SALE PENDING RECEIPT OF FUNDS.

All other items previously advertised hv bn sold.  All prices are OBO + packing materials (unless I hv on hand), shipping & insurance fm 86323. Prefer local pickup in Chino Valley, AZ. Will deliver locally.  Pictures of every item are available on request. PayPal accepted.

Tnx for reading & vy 73,

Bob, K6PF




More information about the Moon mailing list