[Moon] [Moon-Net] MAP65 V2.5 issue when receiving data on network port 50004

[ON4KHG]

Dears,


As per suggested by Dave (G4IDR), the sampling rate in Linrad has to be the
same as the one expected by MAP65, i.e. 96 kHz.
And this was indeed the cause of the "problem" described below. By mistake,
I set the sampling rate in Linrad on 192 kHz.

Now that I set Linrad on 96 kHz, everything is OK, no interruption in the
data stream Linrad > MAP65 over my LAN.
Thanks to Dave for the advice.

73,

Gaëtan, ON4KHG 

-----Original Message-----
From: moon-net-bounces at mailman.pe1itr.com
[mailto:moon-net-bounces at mailman.pe1itr.com] On Behalf Of ON4KHG
Sent: donderdag 23 maart 2017 21:38
To: moon at moonbounce.info; moon-net at mailman.pe1itr.com
Subject: [Moon-Net] MAP65 V2.5 issue when receiving data on network port
50004

Dears,



I have recently changed my EME station setup. Now, I feed MAP65 over my LAN
on port 50004 (the feature "Network" in the tab I/O Devices of the Setup /
Options).
This works fine, I receive the data stream without problem (I see "Receiving
F1") at the bottom left in MAP65 (my system is single pol.) BUT this is so
from second 00 to 30. As from second 31 and up to 59, I get "Receiving Nil"
at the bottom left. And so on every 1 minute period.
If not clear enough, I can make a short video on Youtube to demonstrate the
problem. Using the MAP65 version 2.5 r6139.

Does it seem to be a bug or am I missing something ?
Thanks in advance for your possible help.

73,

Gaëtan, ON4KHG

_______________________________________________
Moon-Net posting and subscription instructions are at
http://www.nlsa.com/nets/moon-net-help.html