[Moon] Qrv 9cm later today.

[g4bao]

Hi Graham, it's a TIM3536-60.

Would be great if you could find one. I've left space in the box for the
second amp!

73
John

On 25 April 2018 at 19:37, graham.d at orange.fr <graham.d at orange.fr> wrote:

> Which fet john??
>
> I sold most everything but still some bits boxes and scrap stuff
>
> Graham
>
> Sent from my Huawei Mobile
>
>
> -------- Original Message --------
> Subject: Re: [Moon] Qrv 9cm later today.
> From: g4bao via Moon
> To: Moon-Net ,moon at moonbounce.info
> CC:
>
>
> Just now I worked
>
> PA3DZL (3.7m dish)150W
>
> 1714 -17 2.5 1270 #* G4BAO PA3DZL R-25 f
>
>
> OK1KIR (6.1m Dish QRO?)
>
> 1726 -17 2.8 1986 #* G4BAO OK1KIR R-16 f
>
>
> PA0BAT 3.7m dish 140W
>
> 1738 -18 1.3 1801 #* G4BAO PA0BAT R-25 f
>
> all would have been copyable on CW with a little effort.
>
> I'm running just 30Watts at the feed of a 1.9m RF hamdesign dish with 2.7mm
> mesh. A SM6FHZ Septum feed built by PA7JB, 0.4dB VKNA9 from G4DDK. About
> 7dB of Sun noise.
> I have a second Toshiba amp but the output device is blown and am looking
> for a replacement FET. Anyone got one?
>
> 73
> John
>
>
> On 25 April 2018 at 14:55, g4bao wrote:
>
> > To make life more exciting after you've all worked Hermann on 3400 today.
> > You can get another initial and new square on 9cm by trying to work me.
> > I've just installed my new 9cm system in my 1.9m dish and apart from feed
> > tweaking when the rain stops, it's good to go. I'm looking for my first
> QSO
> > on what will be EME band number 5
> >
> > Appprox 30W to an SM6FHZ septum, beautifully made for me by PA7JB. 0.4dB
> > G4DDK VLNA9.
> >
> > 73
> > John g4bao
> >
> _______________________________________________
> Moon mailing list
> Moon at moonbounce.info
> /mailman/listinfo/moon
>
> Join eQSL.cc https://eqsl.cc/qslcard/Index.cfm
>
>