From leif at sm5bsz.com  Fri Jun  1 01:01:28 2018
From: leif at sm5bsz.com (Leif Asbrink)
Date: Fri, 1 Jun 2018 01:01:28 +0200
Subject: [Moon] Noise measure with Rtl2832
In-Reply-To: <CADMEjK8_66Butupk=4Vg64359zjOAck4Y_oc7cX+RMsTKSNbgA@mail.gmail.com>
References: <CADMEjK8_66Butupk=4Vg64359zjOAck4Y_oc7cX+RMsTKSNbgA@mail.gmail.com>
Message-ID: <20180601010128.7d582dfaa3dd79542ff37f71@sm5bsz.com>

Hi Andy,

Have a look here:
https://www.youtube.com/watch?v=Jpq6SOf3E28

73

Leif



> Hi,
> 
> I'm looking for any good SW to measure Sunnoise with USB dongle RTL2832?
> Spectravue is very useful but not working with usb dongles
> Any suggest what SW to use for Windows..?
> 
> Br Andy
> _______________________________________________
> Moon mailing list
> Moon at moonbounce.info
> http://moonbounce.info/mailman/listinfo/moon
> 
> Join eQSL.cc  https://eqsl.cc/qslcard/Index.cfm

From jack.f6ajw at gmail.com  Fri Jun  1 09:57:15 2018
From: jack.f6ajw at gmail.com (Jack F6AJW)
Date: Fri, 1 Jun 2018 09:57:15 +0200
Subject: [Moon] Fwd: Regulator and bias for Elisra 3cms PA
In-Reply-To: <1a10df8b-3a86-9b65-7f99-8139ac29fbd8@g0ruz.com>
References: <ecca5788-531a-c07c-9559-8b03aa79b5e7@g0ruz.com>
 <1a10df8b-3a86-9b65-7f99-8139ac29fbd8@g0ruz.com>
Message-ID: <59C4D8CC-DA71-4082-8E85-EEE584A7FD87@gmail.com>

Hello Conrad,
Have a look to F1OPA web-site.
73’s.
Jacques F6AJW / IN93EK

Envoyé de mon iPhone

> Le 31 mai 2018 à 23:59, Conrad PA5Y via Moon <moon at moonbounce.info> a écrit :
> 
> Hello I just got a modified Elisra 20W SSPA for 3cm. I am told that it is 9V for the Ud and -5V bias and that it is very important to ensurethat the -5V bias is always present before the 9V supply is applied. Did anyone ever make a PCB for this application? I know that there were a few of these amplifiers around in the past.
> 
> Any info or advice?
> 
> Regards
> 
> Conrad PA5Y
> 
> _______________________________________________
> Moon mailing list
> Moon at moonbounce.info
> http://moonbounce.info/mailman/listinfo/moon
> 
> Join eQSL.cc  https://eqsl.cc/qslcard/Index.cfm

From g0ruz at g0ruz.com  Fri Jun  1 13:18:46 2018
From: g0ruz at g0ruz.com (Conrad PA5Y)
Date: Fri, 01 Jun 2018 12:18:46 +0100
Subject: [Moon] [Moon-Net] Fwd: Regulator and bias for Elisra 3cms PA
In-Reply-To: <1a10df8b-3a86-9b65-7f99-8139ac29fbd8@g0ruz.com>
References: <ecca5788-531a-c07c-9559-8b03aa79b5e7@g0ruz.com>
 <1a10df8b-3a86-9b65-7f99-8139ac29fbd8@g0ruz.com>
Message-ID: <bb73a9b8e5937a5dac5318ad872863f9@g0ruz.com>

Thank you very much to everyone who offered solutions to this. There are 
several available.

73

Conrad PA5Y

On 2018-05-31 22:59, Conrad PA5Y via Moon-net wrote:
> Hello I just got a modified Elisra 20W SSPA for 3cm. I am told that it
> is 9V for the Ud and -5V bias and that it is very important to
> ensurethat the -5V bias is always present before the 9V supply is
> applied. Did anyone ever make a PCB for this application? I know that
> there were a few of these amplifiers around in the past.
> 
> Any info or advice?
> 
> Regards
> 
> Conrad PA5Y
> 
> _______________________________________________
> Moon-Net posting and subscription instructions are at
> http://www.nlsa.com/nets/moon-net-help.html

From g0ruz at g0ruz.com  Sat Jun  2 11:10:16 2018
From: g0ruz at g0ruz.com (Conrad PA5Y)
Date: Sat, 2 Jun 2018 11:10:16 +0200
Subject: [Moon] WR90/WG16 switch wanted
In-Reply-To: <CY4PR14MB1509F180AA9CB0E18E6CAE96E7610@CY4PR14MB1509.namprd14.prod.outlook.com>
References: <BN6PR2201MB1298330EE94B502F717C2BADF7610@BN6PR2201MB1298.namprd22.prod.outlook.com>
 <CY4PR14MB1509F180AA9CB0E18E6CAE96E7610@CY4PR14MB1509.namprd14.prod.outlook.com>
Message-ID: <e750eb3f-d538-d987-150a-ef39bdabb3c3@g0ruz.com>

Hello all.

I am looking to buy a WR90/WG16 switch. Does anyone have one that they 
are willing to sell?

73

Conrad PA5Y

From rosshannah at xtra.co.nz  Sat Jun  2 11:20:10 2018
From: rosshannah at xtra.co.nz (Ross Hannah)
Date: Sat, 2 Jun 2018 21:20:10 +1200
Subject: [Moon] Fwd: Regulator and bias for Elisra 3cms PA (Jack F6AJW)
In-Reply-To: <mailman.1.1527847201.20358.moon@moonbounce.info>
References: <mailman.1.1527847201.20358.moon@moonbounce.info>
Message-ID: <008b01d3fa52$e8d0b2d0$ba721870$@co.nz>

Hi Conrad,
I have used: Texas Instruments PTN78000AAH, DC-DC Power Supply Module max 29V+ Input, 15/3V- Output, 5-Pin, DIP Module. Available from RS and Digykey etc. 
About US$15

Regards
Ross ZL1EME

-----Original Message-----
From: Moon [mailto:moon-bounces at moonbounce.info] On Behalf Of moon-request at moonbounce.info
Sent: Friday, 1 June 2018 10:00 p.m.
To: moon at moonbounce.info
Subject: Moon Digest, Vol 47, Issue 1

Send Moon mailing list submissions to
	moon at moonbounce.info

To subscribe or unsubscribe via the World Wide Web, visit
	http://moonbounce.info/mailman/listinfo/moon
or, via email, send a message with subject or body 'help' to
	moon-request at moonbounce.info

You can reach the person managing the list at
	moon-owner at moonbounce.info

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Moon digest..."


Today's Topics:

   1. Fwd: Regulator and bias for Elisra 3cms PA (Conrad PA5Y)
   2. Re: Noise measure with Rtl2832 (Leif Asbrink)
   3. Re: Fwd: Regulator and bias for Elisra 3cms PA (Jack F6AJW)


----------------------------------------------------------------------

Message: 1
Date: Thu, 31 May 2018 23:59:15 +0200
From: Conrad PA5Y <g0ruz at g0ruz.com>
To: "moon-net at mailman.pe1itr.com" <moon-net at mailman.pe1itr.com>
Cc: moonbounce_info <moon at moonbounce.info>
Subject: [Moon] Fwd: Regulator and bias for Elisra 3cms PA
Message-ID: <1a10df8b-3a86-9b65-7f99-8139ac29fbd8 at g0ruz.com>
Content-Type: text/plain; charset=utf-8; format=flowed

Hello I just got a modified Elisra 20W SSPA for 3cm. I am told that it 
is 9V for the Ud and -5V bias and that it is very important to 
ensurethat the -5V bias is always present before the 9V supply is 
applied. Did anyone ever make a PCB for this application? I know that 
there were a few of these amplifiers around in the past.

Any info or advice?

Regards

Conrad PA5Y



------------------------------

Message: 2
Date: Fri, 1 Jun 2018 01:01:28 +0200
From: Leif Asbrink <leif at sm5bsz.com>
To: moon at moonbounce.info, moon-net at mailman.pe1itr.com
Subject: Re: [Moon] Noise measure with Rtl2832
Message-ID: <20180601010128.7d582dfaa3dd79542ff37f71 at sm5bsz.com>
Content-Type: text/plain; charset=US-ASCII

Hi Andy,

Have a look here:
https://www.youtube.com/watch?v=Jpq6SOf3E28

73

Leif



> Hi,
> 
> I'm looking for any good SW to measure Sunnoise with USB dongle RTL2832?
> Spectravue is very useful but not working with usb dongles
> Any suggest what SW to use for Windows..?
> 
> Br Andy
> _______________________________________________
> Moon mailing list
> Moon at moonbounce.info
> http://moonbounce.info/mailman/listinfo/moon
> 
> Join eQSL.cc  https://eqsl.cc/qslcard/Index.cfm


------------------------------

Message: 3
Date: Fri, 1 Jun 2018 09:57:15 +0200
From: Jack F6AJW <jack.f6ajw at gmail.com>
To: Conrad PA5Y <g0ruz at g0ruz.com>
Cc: "moon-net at mailman.pe1itr.com" <moon-net at mailman.pe1itr.com>,
	moonbounce_info <moon at moonbounce.info>
Subject: Re: [Moon] Fwd: Regulator and bias for Elisra 3cms PA
Message-ID: <59C4D8CC-DA71-4082-8E85-EEE584A7FD87 at gmail.com>
Content-Type: text/plain;	charset=utf-8

Hello Conrad,
Have a look to F1OPA web-site.
73’s.
Jacques F6AJW / IN93EK

Envoyé de mon iPhone

> Le 31 mai 2018 à 23:59, Conrad PA5Y via Moon <moon at moonbounce.info> a écrit :
> 
> Hello I just got a modified Elisra 20W SSPA for 3cm. I am told that it is 9V for the Ud and -5V bias and that it is very important to ensurethat the -5V bias is always present before the 9V supply is applied. Did anyone ever make a PCB for this application? I know that there were a few of these amplifiers around in the past.
> 
> Any info or advice?
> 
> Regards
> 
> Conrad PA5Y
> 
> _______________________________________________
> Moon mailing list
> Moon at moonbounce.info
> http://moonbounce.info/mailman/listinfo/moon
> 
> Join eQSL.cc  https://eqsl.cc/qslcard/Index.cfm


------------------------------

Subject: Digest Footer

_______________________________________________
Moon mailing list
Moon at moonbounce.info
http://moonbounce.info/mailman/listinfo/moon


------------------------------

End of Moon Digest, Vol 47, Issue 1
***********************************


From i5wbe at i5wbe.it  Mon Jun  4 20:13:01 2018
From: i5wbe at i5wbe.it (Enrico Baldacci)
Date: Mon, 4 Jun 2018 20:13:01 +0200
Subject: [Moon] Prize ARI EME Trophy 2017
Message-ID: <8d1cb9ee-6d35-aa03-56cc-c87c3388aa98@i5wbe.it>

Hello,

Prizes ARI EME TROPHY 2017, consigned at Ham Radio:

OK1KIR  directly

UZ5DXdirectly

YL2GD *to YL2GM*

F6ETI *to **F6HYE***

PA2CHR*to  PA3FQP*

LZ1DP LZ2FO LZ2US LZ4OC *to LZ1JZ*

DF3RU OK1DIX SP3XBOSP6ITF SP6GWN SP7DCS *to DF1SR *

SV1CAL - N5BF - WD5AGO - VA3DIF**via Mail by ARI Milan


73' Enrico i5wbe
**


From pa3dzl at ziggo.nl  Tue Jun  5 19:41:22 2018
From: pa3dzl at ziggo.nl (Jac de Bruijn)
Date: Tue, 5 Jun 2018 19:41:22 +0200
Subject: [Moon] Items FS - Electraft K3EXREF and microHAM cable DB37-EL-K3R
Message-ID: <002101d3fcf4$6b428e20$41c7aa60$@nl>

Hello EME friends,

 

I have some items for sale, both 100% as new.

 

K3EXREF : Frequency lock option for K3/K3S Locks the K3S or K3 to a 10 MHz ext. reference  € 60,- + shipping costs

http://www.elecraft.com/manual/E740156%20K3EXREF%20Installation%20and%20Operation%20Manual%20Rev%20A2.pdf

 

microHAM micro KEYER II cable for K3/K3S : DB37-EL-K3R  € 40,- + shipping costs

http://www.microham.com/Downloads/DB37-EL-K3R.pdf

 

PSE contact me direct.

 

73s de Jac, PA3DZL


From peter.hutchison at btinternet.com  Tue Jun  5 20:36:46 2018
From: peter.hutchison at btinternet.com (PETER HUTCHISON)
Date: Tue, 5 Jun 2018 18:36:46 +0000 (UTC)
Subject: [Moon] K3EXREF FS
References: <2054315093.930894.1528223806063.ref@mail.yahoo.com>
Message-ID: <2054315093.930894.1528223806063@mail.yahoo.com>

Jac,
Please contact me direct  regarding K3EXREF- I cannot find an email address for you.
73, Peter G4URT

From pa3dzl at ziggo.nl  Tue Jun  5 20:57:08 2018
From: pa3dzl at ziggo.nl (Jac de Bruijn)
Date: Tue, 5 Jun 2018 20:57:08 +0200
Subject: [Moon] Items FS - Electraft K3EXREF and microHAM cable
 DB37-EL-K3R
In-Reply-To: <002101d3fcf4$6b428e20$41c7aa60$@nl>
References: <002101d3fcf4$6b428e20$41c7aa60$@nl>
Message-ID: <002501d3fcff$00db04d0$02910e70$@nl>

The K3EXREF is sold

-----Oorspronkelijk bericht-----
Van: Moon [mailto:moon-bounces at moonbounce.info] Namens Jac de Bruijn via Moon
Verzonden: dinsdag 5 juni 2018 19:41
Aan: moon-net at mailman.pe1itr.com; 'freetalk moonnet'
Onderwerp: [Moon] Items FS - Electraft K3EXREF and microHAM cable DB37-EL-K3R

Hello EME friends,

 

I have some items for sale, both 100% as new.

 

K3EXREF : Frequency lock option for K3/K3S Locks the K3S or K3 to a 10 MHz ext. reference  € 60,- + shipping costs

http://www.elecraft.com/manual/E740156%20K3EXREF%20Installation%20and%20Operation%20Manual%20Rev%20A2.pdf

 

microHAM micro KEYER II cable for K3/K3S : DB37-EL-K3R  € 40,- + shipping costs

http://www.microham.com/Downloads/DB37-EL-K3R.pdf

 

PSE contact me direct.

 

73s de Jac, PA3DZL

_______________________________________________
Moon mailing list
Moon at moonbounce.info
http://moonbounce.info/mailman/listinfo/moon

Join eQSL.cc  https://eqsl.cc/qslcard/Index.cfm

---
Deze e-mail is gecontroleerd op virussen door AVG.
http://www.avg.com


From k6pf at sbcglobal.net  Wed Jun  6 04:45:39 2018
From: k6pf at sbcglobal.net (k6pf at sbcglobal.net)
Date: Tue, 5 Jun 2018 19:45:39 -0700
Subject: [Moon] Items for sale - updated list
Message-ID: <82B87DF84E954392AD59F8E0D9680B38@DESKTOPCKTC4DG>

Hv sold 50% of items originally posted on 5/20/18.  Here's an updated list of items still available:
1.       Andrew Type SGL5-15B4 Sureground LDF5 Grounding Kit w/ 2-hole lug for 7/8" heliax.  New in bag.  Hv 5 available at $15 ea.

2.       Battery kit for HP 8970A Noise Figure Meter including DVD instructions.  Bought 2 but only needed 1.  $9.

3.       New 100pf, 7.5KVDC, 5% HV ceramic xmitting doorknob caps.  High Energy Corp model HT50V101JA.  4 available at $18 ea.

4.       NOS Centralab CRL 850, 100pf, 7.5KVDC, 10%, N750 HV ceramic xmitting doorknob caps. 3 available at $16 ea.

5.       NOS 1000pf, 5KVDC HV ceramic xmitting doorknob cap.  1 available at $12.

6.       Linksys 2.4GHz wireless-G broadband router (802.11g) w/ speed booster & AC adapter.  Has 4 network jacks + internet.  Used but in gud condx, $10.

7.       Small pair USB powered computer speakers.  Amazon basics model A100 w/ volume control.  4.75"H x 3"W x 2.75"D.  New, $10.

8.       NIB Cen-Tech (Harbor Freight Tools) 1" travel machinist Dial Indicator.  Item #00623).  $15.

9.       R.L. Drake vintage TV-1000-LP low pass filter.  1KW max below 30MHz.  52 ohm w/ SO-239 connectors in & out.  Piece of foam glued to bottom plate but otherwise in gud condx.  $20.

Above items are OBO + shipping fm 86323.  Photos available upon request.  PayPal accepted w/ 3.5% fee added.  

Tnx & vy 73,

Bob, K6PF (DM34ss)

6/5/18


From k6pf at sbcglobal.net  Wed Jun  6 04:46:09 2018
From: k6pf at sbcglobal.net (k6pf at sbcglobal.net)
Date: Tue, 5 Jun 2018 19:46:09 -0700
Subject: [Moon] Items for sale - updated list
Message-ID: <6C6A40FF1BF844EDABBCE321A9A7D4DD@DESKTOPCKTC4DG>

Hv sold 50% of items originally posted on 5/20/18.  Here's an updated list of items still available:
1.       Andrew Type SGL5-15B4 Sureground LDF5 Grounding Kit w/ 2-hole lug for 7/8" heliax.  New in bag.  Hv 5 available at $15 ea.

2.       Battery kit for HP 8970A Noise Figure Meter including DVD instructions.  Bought 2 but only needed 1.  $9.

3.       New 100pf, 7.5KVDC, 5% HV ceramic xmitting doorknob caps.  High Energy Corp model HT50V101JA.  4 available at $18 ea.

4.       NOS Centralab CRL 850, 100pf, 7.5KVDC, 10%, N750 HV ceramic xmitting doorknob caps. 3 available at $16 ea.

5.       NOS 1000pf, 5KVDC HV ceramic xmitting doorknob cap.  1 available at $12.

6.       Linksys 2.4GHz wireless-G broadband router (802.11g) w/ speed booster & AC adapter.  Has 4 network jacks + internet.  Used but in gud condx, $10.

7.       Small pair USB powered computer speakers.  Amazon basics model A100 w/ volume control.  4.75"H x 3"W x 2.75"D.  New, $10.

8.       NIB Cen-Tech (Harbor Freight Tools) 1" travel machinist Dial Indicator.  Item #00623).  $15.

9.       R.L. Drake vintage TV-1000-LP low pass filter.  1KW max below 30MHz.  52 ohm w/ SO-239 connectors in & out.  Piece of foam glued to bottom plate but otherwise in gud condx.  $20.

Above items are OBO + shipping fm 86323.  Photos available upon request.  PayPal accepted w/ 3.5% fee added.  

Tnx & vy 73,

Bob, K6PF (DM34ss)

6/5/18


From jmorris at namei.org  Thu Jun  7 20:06:45 2018
From: jmorris at namei.org (James Morris)
Date: Fri, 8 Jun 2018 04:06:45 +1000 (AEST)
Subject: [Moon] WTB: xref-ft GPS locking board
Message-ID: <alpine.LRH.2.21.1806080406380.27121@namei.org>

I'm looking to lock my ft-817 with the xref-ft board.  As these are out of 
production, if anyone has a spare they'd sell me, please let me know.

I'd also be interested xref boards for other rigs.


- James VK2TXP/W7
-- 
James Morris
<jmorris at namei.org>


From andre_f1pyr at yahoo.fr  Fri Jun  8 18:55:10 2018
From: andre_f1pyr at yahoo.fr (=?UTF-8?Q?Andr=C3=A9_F1PYR?=)
Date: Fri, 8 Jun 2018 16:55:10 +0000 (UTC)
Subject: [Moon] QRV 3 cm tomorrow morning up to 08h40z
References: <178492005.3945893.1528476910399.ref@mail.yahoo.com>
Message-ID: <178492005.3945893.1528476910399@mail.yahoo.com>


From sa6bun at gmail.com  Sun Jun 10 15:27:21 2018
From: sa6bun at gmail.com (Michael Kohla)
Date: Sun, 10 Jun 2018 15:27:21 +0200
Subject: [Moon] Wanted: Copper Tube 70 x 2 mm
Message-ID: <CAGL03ih=afK-h7b3idOg49wdybKhzjvAXWp6ZeHB7Sj-DnBp8A@mail.gmail.com>

Hi all,

I am looking for a lenghth of 250 mm of round copper tube with 70 mm OD and
2mm wall caliper. Can anybody point me to a source selling small
quantities, or does anyone have such a tube in surplus, so I could  buy it
from them?
Pse respond by private mail,

73, Michael

From i5wbe at i5wbe.it  Mon Jun 11 11:43:41 2018
From: i5wbe at i5wbe.it (Enrico Baldacci)
Date: Mon, 11 Jun 2018 11:43:41 +0200
Subject: [Moon] Reminder log ARI-EME Trophy Spring 2018
Message-ID: <c857c379-a30a-2fa3-b985-4ab8e6c351a6@i5wbe.it>

Dears EMEfans,

I invite you to send your log will be appreciated, also with only one 
qso, end-time Monday June 18th.All format areaccepted, better if xls.
*
http://www.eme2008.org/ari-eme/contest.html
*
Best 73'sde   EnricoI5WBE

A.R.I. - EME Manager Coordinator



From rick1ds at hotmail.com  Sat Jun 16 19:07:23 2018
From: rick1ds at hotmail.com (Rick R)
Date: Sat, 16 Jun 2018 17:07:23 +0000
Subject: [Moon] Mid-Atlantic States VHF Conference seeks papers,
 presenters and registrants
Message-ID: <MW2PR1901MB2122A63701C48EFA41849057FA730@MW2PR1901MB2122.namprd19.prod.outlook.com>

The 2018 June VHF Contest is now history--Be an early bird--we are seeking additional speakers and papers for the Mid-Atlantic States VHF Conference for the weekend of Sept 28-30, 2018 at the Holiday Inn  Bensalem-Philadelphia.

Please send your topic or paper to rick1ds at hotmail.com

To register for the conference, visit www.packratvhf.com<https://nam03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.packratvhf.com&data=02%7C01%7C%7Cf13911d52a7d4e41078208d5b35f8242%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636612145142749149&sdata=Cx32E9Yii%2FLih1mfPNoZCrTnb8TInvI5fz0BQ9D0juo%3D&reserved=0> and look at the left upper corner for the conference info and the link for speaker info, conference registration, payment and hotel registration information

http://www.packratvhf.com/conf/2018_vhf_registration.php<https://nam03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.packratvhf.com%2Fconf%2F2018_vhf_registration.php&data=02%7C01%7C%7Cf13911d52a7d4e41078208d5b35f8242%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636612145142749149&sdata=giphdtPuhEa0FnpEO0DfdO3uCgtZkoPkaqAT1RC%2BbxM%3D&reserved=0>

TNX--HP to C U all there.   Rick, K1DS


From ben at sm6cku.se  Sat Jun 16 20:43:08 2018
From: ben at sm6cku.se (Ben - SM6CKU)
Date: Sat, 16 Jun 2018 20:43:08 +0200
Subject: [Moon] 10 GHz
References: <52DFDD7EFAEA4E1C9C8A77585FFECABF@muijlwijkPC>
Message-ID: <C326C2AF193F4D638010F23E218207D0@SM6CKU>

GE,

Here are the result of my 10 GHz activity today and yesterday.
June 15 DL7YC and UR5LX #
June 16 SA6BUN, OH2DG, HB9BBD#, SP6JLW, DL7YC, ES5PC, OK1CA, OK1KIR, OZ1LPR, 
HB9Q, DF1SR# and finally WA6PY.
Hrd but not worked DL6ABC, IW2FZR, DB6NT.
Still using 4m dish, 15-18 watts and CP.
Will listen in tmw if not too heavy rain.

73 de Ben
SM6CKU 


From ben at sm6cku.se  Sun Jun 17 09:36:33 2018
From: ben at sm6cku.se (Ben - SM6CKU)
Date: Sun, 17 Jun 2018 09:36:33 +0200
Subject: [Moon] 10 GHz - Youtube
References: <52DFDD7EFAEA4E1C9C8A77585FFECABF@muijlwijkPC>
 <C326C2AF193F4D638010F23E218207D0@SM6CKU>
Message-ID: <2149A534673F4736957F337191265B59@SM6CKU>

Good morning,

I have uploaded some short clips from 3cm EME yesterday. Sorry for the dusty 
KX3...high definition can be rude

https://www.youtube.com/user/SM6CKU

73 de Ben 


From dario.fzr at gmail.com  Sun Jun 17 11:02:12 2018
From: dario.fzr at gmail.com (Dario Ferrari)
Date: Sun, 17 Jun 2018 11:02:12 +0200
Subject: [Moon] 3cm ja
Message-ID: <CAExo4sx6J_GOy-JG4SpS2cf9Og4w2t-evyZzZr2-r30NOh9xWg@mail.gmail.com>

Hi to all. I call cq for ja friends on 3cm band

From ben at sm6cku.se  Mon Jun 18 09:28:34 2018
From: ben at sm6cku.se (Ben - SM6CKU)
Date: Mon, 18 Jun 2018 09:28:34 +0200
Subject: [Moon] 10 GHz
References: <52DFDD7EFAEA4E1C9C8A77585FFECABF@muijlwijkPC>
 <C326C2AF193F4D638010F23E218207D0@SM6CKU>
 <2149A534673F4736957F337191265B59@SM6CKU>
Message-ID: <915952BA21724A7FA49AD815C884E2EE@SM6CKU>

Hello again,

Sunday produced only thre more QSO's on 3cm, UR5LX, LX1DB and F1PYR.
Heard but not worked SP3XBO, SM2CEW and IZ2DJP

73 de Ben
SM6CKU

From ja6ahb at plala.to  Thu Jun 21 14:51:40 2018
From: ja6ahb at plala.to (Toshio Tanaka JA6AHB)
Date: Thu, 21 Jun 2018 21:51:40 +0900
Subject: [Moon] sri test
Message-ID: <000001d4095e$9957c930$cc075b90$@plala.to>

Sri test


From ja6ahb at plala.to  Thu Jun 21 14:56:50 2018
From: ja6ahb at plala.to (Toshio Tanaka JA6AHB)
Date: Thu, 21 Jun 2018 21:56:50 +0900
Subject: [Moon] sri test
Message-ID: <000501d4095f$52534900$f6f9db00$@plala.to>

Sri test


From jvm at netvisit.nl  Tue Jun 26 11:26:15 2018
From: jvm at netvisit.nl (Jan van Muijlwijk)
Date: Tue, 26 Jun 2018 11:26:15 +0200
Subject: [Moon] EME 2018 only a few days left to book
Message-ID: <877FA45FF7C84713AC30596804717999@muijlwijkPC>

To all who are thinking about participating in EME 2018 and did not book yet.

You only have a few days left to book.
The booking agency will close the booking part of the website at the end of June.

We simply need the time to order all items, organise the tours, print the papers etc.
To do that correctly we need to know the exact number of participants.

The booking module is not the most user friendly software I ever saw (to put it mildly...)
But we cannot change it, so that is how it is.

Only the most popular arrangements can be booked via the website.

If you want something else, that is perfectly possible!

Rooms are reserved for us until the end of June.

To arrange things the way you want it you can e-mail the hotel:

t.schripsema at zuiderduin.nl


Looking forward meeting many of you in Egmond aan Zee and in Dwingeloo at PI9CAM!


73!

Jan
PA3FXB (team PI9CAM)

janvmu at gmail.com

From i5wbe at i5wbe.it  Tue Jun 26 17:02:40 2018
From: i5wbe at i5wbe.it (Enrico Baldacci)
Date: Tue, 26 Jun 2018 17:02:40 +0200
Subject: [Moon] Results ARI EME Trophy Spring 2018
Message-ID: <a9d92720-1678-6568-52ed-89c5e6079a50@i5wbe.it>

Hello Emer's,

at these links  you can find the Results of ARI EME Trophy Spring 2016.


http://www.eme2008.org/ari-eme/Results%20Trophy%20Spring%202018.pdf

or

http://ari.it/index.php?option=com_content&view=category&layout=blog&id=273&Itemid=291&lang=it


See you on Autumn Section 8 - 9 Sept.


73' de Enrico i5wbe





From rick1ds at hotmail.com  Wed Jun 27 01:03:45 2018
From: rick1ds at hotmail.com (Rick R)
Date: Tue, 26 Jun 2018 23:03:45 +0000
Subject: [Moon] Earlybird registration MASVHF Conf
Message-ID: <MW2PR1901MB2122C134D5AE70E603DACED8FA490@MW2PR1901MB2122.namprd19.prod.outlook.com>

Seeking additional speakers and papers for the Mid-Atlantic States VHF Conference for the weekend of Sept 28-30, 2018 at the Holiday Inn  Bensalem-Philadelphia. Please send your topic or paper to rick1ds at hotmail.com

To register for the conference, visit www.packratvhf.com<https://nam03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.packratvhf.com&data=02%7C01%7C%7Cf13911d52a7d4e41078208d5b35f8242%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636612145142749149&sdata=Cx32E9Yii%2FLih1mfPNoZCrTnb8TInvI5fz0BQ9D0juo%3D&reserved=0>  click the link for speaker info, conference registration, payment and hotel registration information http://www.packratvhf.com/conf/2018_vhf_registration.php<https://nam03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.packratvhf.com%2Fconf%2F2018_vhf_registration.php&data=02%7C01%7C%7Cf13911d52a7d4e41078208d5b35f8242%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636612145142749149&sdata=giphdtPuhEa0FnpEO0DfdO3uCgtZkoPkaqAT1RC%2BbxM%3D&reserved=0>

TNX--HP to C U all there.   Rick, K1DS


From briaandy at gmail.com  Fri Jun 29 12:53:02 2018
From: briaandy at gmail.com (Andy Brian)
Date: Fri, 29 Jun 2018 11:53:02 +0100
Subject: [Moon] Rotary for 3cm and up
Message-ID: <CADMEjK9rncnjub7MFRuyZ904GJJGnpse_pyp2o4FM696muDj0A@mail.gmail.com>

Hi Mooners,

I'm trying to build/buy rotary which is precise enough for 10GHz,12GHz and
maybe later for listen 24Ghz.
I tried to built one by myself for azimuth  but the gears (angle gear 1:60)
having to much free movements and the dish have free movement for a few
degree....not useable...

Any suggestion are welcome with yours experience?
I want to experiment with dishes from 90cm to 120cm

BR Andy

From g3ltf at btinternet.com  Fri Jun 29 13:36:49 2018
From: g3ltf at btinternet.com (Peter Blair)
Date: Fri, 29 Jun 2018 12:36:49 +0100
Subject: [Moon] [Moon-Net] Rotary for 3cm and up
In-Reply-To: <CADMEjK9rncnjub7MFRuyZ904GJJGnpse_pyp2o4FM696muDj0A@mail.gmail.com>
References: <CADMEjK9rncnjub7MFRuyZ904GJJGnpse_pyp2o4FM696muDj0A@mail.gmail.com>
Message-ID: <350E01345CB740B0A0C6EFB9741B8C44@PeterKBlairPC5>

http://moonbouncers.org/A%20semi%20professional.pdf

This is how DL1YMK did it, 73 GL Peter G3LTF 

From: Andy Brian via Moon-net 
Sent: Friday, June 29, 2018 11:53 AM
To: moon-net at mailman.pe1itr.com ; moon at moonbounce.info 
Cc: Andy Brian 
Subject: [Moon-Net] Rotary for 3cm and up

Hi Mooners,

I'm trying to build/buy rotary which is precise enough for 10GHz,12GHz and maybe later for listen 24Ghz.
I tried to built one by myself for azimuth  but the gears (angle gear 1:60) having to much free movements and the dish have free movement for a few degree....not useable...


Any suggestion are welcome with yours experience?
I want to experiment with dishes from 90cm to 120cm

BR Andy



--------------------------------------------------------------------------------
_______________________________________________
Moon-Net posting and subscription instructions are at http://www.nlsa.com/nets/moon-net-help.html


From eme at kc4sw.com  Fri Jun 29 18:38:54 2018
From: eme at kc4sw.com (Stephen Hanselman)
Date: Fri, 29 Jun 2018 09:38:54 -0700
Subject: [Moon] [Moon-Net] Rotary for 3cm and up
In-Reply-To: <350E01345CB740B0A0C6EFB9741B8C44@PeterKBlairPC5>
References: <CADMEjK9rncnjub7MFRuyZ904GJJGnpse_pyp2o4FM696muDj0A@mail.gmail.com>
 <350E01345CB740B0A0C6EFB9741B8C44@PeterKBlairPC5>
Message-ID: <9101BAF9-E838-4F1C-BB71-65244BE94711@kc4sw.com>

I have a great platform for you. Upside precision dish pointing Scientific Atlanta AZ over EL mount.  Downside it weighs 500 pounds.  

Sorry, you asked a serious question but I had to do it.

Seriously, the mount should move a 10M dish easily and it’s taking up a pallet location on our floor. 

73's
 
Stephen Hanselman, KC4SW
Datagate Systems, LLC
3107 North Deer Run Road #24
Carson City, Nevada, 89701
(775) 882-5117 office
(775) 720-6020 mobile
s.hanselman at datagatesystems.com
www.datagatesystems.com
a Service Disabled, Veteran Owned Small Business
DISCLAIMER:
This e-mail and any attachments are intended only for use by the addressee(s) named herein and may contain legally privileged and/or proprietary information. If you are not the intended recipient, any dissemination, distribution or copying of this e-mail and any attachments is strictly prohibited. If you have received this e-mail in error, please immediately notify me and permanently delete the original and all copies and printouts of this e-mail and any attachments.

Sent from my iPad

> On Jun 29, 2018, at 04:36, Peter Blair via Moon <moon at moonbounce.info> wrote:
> 
> http://moonbouncers.org/A%20semi%20professional.pdf
> 
> This is how DL1YMK did it, 73 GL Peter G3LTF 
> 
> From: Andy Brian via Moon-net 
> Sent: Friday, June 29, 2018 11:53 AM
> To: moon-net at mailman.pe1itr.com ; moon at moonbounce.info 
> Cc: Andy Brian 
> Subject: [Moon-Net] Rotary for 3cm and up
> 
> Hi Mooners,
> 
> I'm trying to build/buy rotary which is precise enough for 10GHz,12GHz and maybe later for listen 24Ghz.
> I tried to built one by myself for azimuth  but the gears (angle gear 1:60) having to much free movements and the dish have free movement for a few degree....not useable...
> 
> 
> Any suggestion are welcome with yours experience?
> I want to experiment with dishes from 90cm to 120cm
> 
> BR Andy
> 
> 
> 
> --------------------------------------------------------------------------------
> _______________________________________________
> Moon-Net posting and subscription instructions are at http://www.nlsa.com/nets/moon-net-help.html
> 
> _______________________________________________
> Moon mailing list
> Moon at moonbounce.info
> http://moonbounce.info/mailman/listinfo/moon
> 
> Join eQSL.cc  https://eqsl.cc/qslcard/Index.cfm